Air Compressor Filter - Air-Components.com


Home Company Air Compressors Compressor Parts Compressor Service Motor Repair Resources Contact Us

Air Compressor Filters

Ingersoll Rand has the widest selection of air treatment products and application knowledge to protect your investment and compressed air system.

40 Bar Filters

Properly sized storage is crucial to realizing the maximum performance of your compressed air investment. Often critical in the operation and reliability of a system, stored compressed air provides the capacitance necessary for the system to react to demands from the production floor. Additional sufficient storage provides a buffer to enable the controls from rapid cycling of your compressors.

Ingersoll-Rand long has recognized the need for properly sizing the air storage system. Our experts will help you in identifying your storage requirements. Receivers are available in sizes ranging from 120 gallon through 5,000 gallon and with ratings of 125, 150, 300, 550, and 725 Maximum Allowable Working Pressure.

40 Bar Filters Features:

Increased reactance time decreases short cycling of your compressed air system
Provides a pulsation buffer between down stream equipment and the compressed air source
All components constructed in accordance with World Standards and stamped as applicable
Internal corrosion protection to maintain maximum performance over service life

Air Compressor Filter Features:

Removes particles down to .1 micron at 99.98% efficiency.
IR’s NLM Series: Guaranteed 2 psig or less pressure drop for 5 years.
Innovative, Pleated Element reduces pressure drop, scheduled maintenance intervals, and element replacements.

Standard General Purpose Filters

This general purpose pre-filter is designed to remove solid and liquid contaminants from compressed air. The filter will remove oil, water, condensate, dust, metal particles and pipescale.

General Purpose Filter Features:

Solids will be removed down to 1 micron, liquids down to .5 mg/m3 W at 21 degrees C.
The filter utilizes the interception method for removing contaminants.
The filter elements are long lasting and easily replaceable.
The filter has an automatic float drain for constant removal of contaminants.

Standard High Efficiency Filters

The high efficiency filter is designed to remove liquids and solids from compressed air. The filter uses the coalescing method for removing contaminants.

Filter Features

These filters should be preceded by a general purpose pre-filter.
Removes particles down to 0.01 micron, liquids down to 0.01 mg/m3 W at 21 degrees C.
The filter elements are long lasting and easy to install.
Lift and twist mechanism makes for easy element exchange.

This high efficiency carbon filter is capable of removing oil vapor and odor from compressed air. The maximum remaining oil carryover is <0.003mg/m3 W at 21 degrees C. It is suitable for the food and drug processing industry as well as labratories.

Carbon Filter Features:

The AC filter should be installed after the HE filter, which in turn should be preceded by a DP grade.
The filter element is long lasting and easy to install.
The element is constucted of a multi-layered activated carbon filter media, glass filled nylon end caps and a perforated stainless steel inner and outer support core.
The lift and twist mechanism makes for easy element exchange.

This dust filter removes particles 1 micron or greater from dried compressed air. The filter should be used for after-filter applications. The filter can be used for a wide range of applications such as removing dirt, metal particles and pipescale.

Filter Features:

The filter element is long lasting and easy to install or disassemble.
The element is made up of multi-layered borosilicate microfibre filter media, glass filled nylon end caps and perforated stainless steel, inner and outer support cores.
The lift and twist mechanism makes for easy element exchange.
The filter includes a manual drainage system. It also includes a differential pressure indicator to monitor pressure drop.

Our highly trained staff of sales representatives, air compressor parts experts and factory-trained and certified air compressor service technicians are available 24 hours a day, seven days a week.

Call 866-413-8077 or Email us for more air compressor filter information.