|
Q: What kind of maintenance should be done to my compressor?
A: On oil-lubricated units, you should check the oil level regularly
and change it as specified in the owner's manual. Also, change
the oil filter as the manufacturer suggests. Clean or replace
the air filter on a regular basis. On oil-less units, the air
filter must be kept clean or debris will enter the compression
chamber, resulting in high repair costs. Remember to drain condensate
from the tank regularly.
Q: What are the main areas of a compressor package that
need maintenance?
A: Compressor, heat exchanger surfaces, air lubricant separators,
lubricant, lubricant filters and the air inlet filter.
Q: How can I tell if my drain valves are operating properly?
A: Routinely inspect condensate drains. Improper operation will
exhaust compressed air to ambient or flood compressed air system
with liquid water and oil. Clear tubing is recommended between
electric drain and condensate collection point - a transparent
tube provides easy inspection of drain operation.
| |
